View Catalogue / Print      View Flyer / Print CABLE PULLING LUBRICANT - POLYWATER Product Description ** Clean drying and non-staining for less mess. ** Water based and water washable. ** Good Friction reducing properties. ** Applies easily by pumping, or using the front end pack bag system. ** Low Solids will not cement-in cables. ** Evaporates after use. Nothing to soil hands or pollute environment. ** Temperature stable. No waste due to phase separation. ** Compatible with most cables, including polyethylene jackets. ** Proven effectiveness through decades of worldwide use. ** Non-Flammable material. ** Tested via IEEE 1210.   ** Temperature used range: -5°C to 33°C (20°F to 90°F) ** Polywater® G is general purpose, clear, clean, water-based, thixotropic gel lubricant recommended for all types of cable pulling, including verticals. ** Environmentally safe and non-toxic Product Specification Item Code Capacity DSSB-CLA-CL/PW 5 Gallons / 19 Liters   Product Specification     read more

View / Print Catalogue   3M ''QUICK TERM II'' COLD SHRINK SILICONE RUBBER ​TERMINATION KIT FOR OUTDOOR 3 CORE XLPE/ SWA/ PVC CABLES (UP TO 22KV)   Product Description  Each 3M Quick Term II series kits will handle a wide range of cable and conductor sizes. There is the option to choose skirted or tubular and conversion from single core to three core and inverted applications. The 3M Brand Rejacketing Sleeves are a series of silicone rubber insulators incorporating inner-expandable polyester braid designed to reduce sliding friction and deliver the insulator onto the cable. Rejacketing sleeves are designed to protect three-conductor power cable phase legs from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards associated with the termination operating environment. Product Specification   (Silicone Rejacketing Sleeve/Dark GreyBoot/QT-II  4 Skirted Version) **Cable Insulation O.D & Outer Diameter **Up to 22KV Indoor Application Kit Number Cable Insulation Range (mm) Cable OD Range (mm) Cable Conductor Size (sq. mm) 3.3/6/6KV 11KV 22KV Indoor 62-RS 41-4 MAL - 30 - 49 - - - 62-RS 42-4 MAL 16 - 20 37 - 67 70 - 150 35 - 95 35 62-RS 43-4 MAL 20 - 33 49 - 79 120 - 240 120 - 185 50 - 95 62-RS 44-4 MAL 26 - 41 64 - 109 240 - 500 240 - 400 120 - 240 Product Image read more

View / Print Catalogue   3M ''QUICK TERM II'' COLD SHRINK SILICONE RUBBER ​TERMINATION KIT FOR INDOOR 3 CORE XLPE/ SWA/ PVC CABLES (UP TO 11KV) Product Description  Each 3M Quick Term II series kits will handle a wide range of cable and conductor sizes. There is the option to choose skirted or tubular and conversion from single core to three core and inverted applications. The 3M Brand Rejacketing Sleeves are a series of silicone rubber insulators incorporating inner-expandable polyester braid designed to reduce sliding friction and deliver the insulator onto the cable. Rejacketing sleeves are designed to protect three-conductor power cable phase legs from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards associated with the termination operating environment.   Product Specification   (Silicone Rejacketing Sleeve/Dark GreyBoot/QT-II Version) **Termination Phase Length Can Be Customised Via Extention: S = max.350mm  L= max. 600mm  (x) = custom lengths **Up to 11KV   Kit Number Cable Insulation Range (mm) Cable OD Range (mm) Cable Conductor Size (sq. mm)* 3.3/6/6KV 11KV 62-RS 41-3 MAL 12 - 18 30 - 49 16 - 50 - 62-RS 42-3 MAL 15 - 24 37 - 67 60 - 150 35 - 95 62-RS 43-3 MAL 20 - 33 49 - 79 120 - 240 120 - 185 62-RS 44-3 MAL 26 - 41 64 - 109 240 - 500 240 - 300   Product Image read more

View / Print Catalogue   3M QT-II SINGLE-CORE XLPE SHIELDED CABLE   Product Description    Each 3M Quick Term II series kits will handle a wide range of cable and conductor sizes. There is the option to choose skirted or tubular and conversion from single core to three core and inverted applications. The 3M Brand Rejacketing Sleeves are a series of silicone rubber insulators incorporating inner-expandable polyester braid designed to reduce sliding friction and deliver the insulator onto the cable. Rejacketing sleeves are designed to protect three-conductor power cable phase legs from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards associated with the termination operating environment. Product Specification VOLTAGE APPLICATION 3M PRODUCT NUMBER Conductor Size Range (sq. mm) Primary Insulation O.D. Range (mm) Cable Jacket O.D. Range (mm) 5-15KV OUTDOOR 5632K 10 - 50 8 - 17 14 - 23 5633K 70 - 120 16 - 23 20 - 30 5635K 150 - 300 21 - 34 25 - 41 5636K 400 - 630 28 - 42 33 - 48 5637K 500 - 800 35 - 50 33 - 61 5-15KV INDOOR 5622K 35 11 - 17 - 5623K 50 - 95 14 - 22 - 5624K 95 - 240 20 - 33 - 5625K 400 - 630 28 - 46 - Up to 24KV INDOOR 5633K 35 - 50 16 - 23 20 - 30 5635K 70 - 120 21 - 34 25 - 41 5636K 185 - 240 28 - 42 33 - 48 5637K 300 - 630 33 - 50 38 - 61 Up to 24KV OUTDOOR/ INDOOR 5691K 35 - 50 16 - 23 20 - 30 5692K 70 - 120 21 - 34 25 - 41 5693K 185 - 240 28 - 42 33 - 48 5694K 300 - 630 33 - 50 38 - 61 Up to 35KV INDOOR 5691K 35 - 70 16 - 23 20 - 30 5692K 120 - 185 21 - 34 25 - 41 5693K 185 - 300 28 - 42 33 - 48 5694K 400 - 500 33 - 50 38 - 61 5684-3 MAL 630 - 800 33 - 53 38 - 75 Up to 35KV OUTDOOR/ INDOOR 5696K 35 - 70 21 - 34 25 - 41 5697K 120 - 185 28 - 42 33 - 48 5698K 240 - 400 33 - 49 38 - 61 5608 MAL 500 - 630 46 - 75 - Product Image read more

 View Catalogue / Print LEAK DETECTOR (500ML) WATER BASED Product Description  Sulfur Hexafluoride (SF6) gas is widely used in the electrical industry as an insulating material for many years. The leak detector is used to detect any SF6 gas leackage from pipes, nozzles, head and similar openings.   Main Features: • Water based formulation • No oils • No silicones or harmful solvents • No run-off hazard. • Non-Flammable and completely odourless • Fitted with 360 degree spray system  • Can be used on oxygen systems.   Product Specification ITEM CODE SIZE DSSB-TI-CLD500ML 500ML   Product Image       read more

 View Catalogue / Print SF6 GAS LEAK DETECTOR  Product Description The new ''HI300 CPU'' series brings you the technology of tomorrow, today. We have changed not only the external appearance of our leak detectors, but also increased its complexity. So, the innovative MPC circuitry and advanced digital signal processing monitor is used to monitor the scanning tip up to 2000 times per second. Speed ​​automatic reset, a clean mechanical pump, display devices are used together to simplify the search for SF6 Gas leaks. A completely newly designed sensor increases sensitivity, improves the reliability and lasts twice as long as its predecessor. This leads to higher availability and lower maintenance costs. Main Features: • Micro-processor controlled circuit with modern digital signal processing  • Battery voltage display  • Certified in accordance with SAE J1627 • Audible alarm with varying frequency  • CE approval  • Detection of halogen gases and SF6   Characteristics:   • Visual Leakage-size display 6 LED segments • Mechanical pump for positive air flow through the sensor • Reset via reset buton • Maximum Sensitivity 3g/year   Product Specification ITEM CODE DSSB-SFG-HI300CPU-C Product Image   read more